How To Fix Unreadable Disc Error Xbox 360

What causes Xbox 360 discs to become unreadable?

The first step you should take towards unreadable disc on Xbox 360 repair is to carefully read the Xbox 360 repair guide. Pay extra attention to the instructions and graphics that lay out the particulars and procedures for dismantling and reassembling the console. After you’ve done so, here’s what you can try, it works most of the time!
Well, there are two major causes of this issue – scratched Xbox 360 disc due to absence op protective padding in disc region and overheating of the console leading to soldering connections in the hardware getting malformed.
Switch off the power of Xbox 360 console and completely unplug it; Take a small screwdriver, unscrew and open up the console so that you are in clear view of the soldering connections, motherboard and the CPU/ GPU;
1 Switch off the console; 2 Check if all cables are properly attached; 3 If there are no loose cables, unplug them all with the exception of the power cord; 4 Take out the hard drive and delicately clean it using a soft cloth so that it gets rid of any dust or dirt particles without getting scratched; More items…

How do I clean the hard drive on my Xbox One?

To clean the Xbox ONE disc drive, you need to remove the disc from the console. If you have a hard time taking out the CDs, it’s best to get a computer repair store to do the job. After cleaning your Xbox ONE disc drive, you should make sure it’s free of dust and dirt. If you notice a heavy scratch on your disc, you may need to replace it.
How to safely and smartly clean your dirty Xbox One 1 Dust cloth. When it comes to cleaning your Xbox One, your very best friend is a dust cloth. … 2 Compressed air. If it’s been a while since you’ve cleaned out your Xbox One, then you might notice that there is dust everywhere. 3 Avoid damp wipes. … 4 Cleaning your controllers. …
1 Press the Xbox One button on your controller, and select Settings . 2 Navigate to Devices & connections > Blu-ray . 3 Select Persistent Storage . 4 Select Clear Persistent Storage .
Use a damp cloth or cotton swabs with alcohol to clean the buttons on the Xbox One. If you cannot wipe them off with a cloth, you can use a rubbing alcohol soaked cotton swab. Don’t apply too much pressure, as you don’t want to damage the buttons on the controller or the disc.

How to fix Xbox 360 that won’t turn on?

Use a bare finger to press the Power button (Xbox 360 S). The S model has a touch-sensitive button, and may not work with a gloved finger or if you use a fingernail. Press the button with your bare finger to turn the console on. Let the power supply cool. An overheating power supply is one of the most common reasons that an Xbox 360 will not start.
Check the lights on the front of the Xbox 360. The ring of lights around your Power button can indicate what kind of problem you are experiencing. This can help determine how to go about fixing it: Green lights – The system is operating normally.
Check the light on your power supply. Your Xbox 360’s power supply also has a light on the back. This light can help you determine if your power supply is failing: No light – The power supply is not receiving power from the wall. Green light – The power supply is working correctly and the Xbox is on.
Look for bent pins in the USB ports. A common cause of failure for Xbox 360 consoles is bent pins in the USB ports causing a short circuit: Examine the USB ports on the Xbox 360, both in the front and in the back. If any of the pins inside are touching each other or the casing of the port, they are likely causing a short circuit.

How do I Clean my Xbox One disc drive?

After cleaning your Xbox ONE disc drive, you should make sure it’s free of dust and dirt. If you notice a heavy scratch on your disc, you may need to replace it. If your XBox One disc has a lot of dust, use a compressed air duster to clean the discs. If you’re concerned about the discs’ quality, clean them with a soft, damp cloth and alcohol.
Cleaning Smudges and Grime Mix a solution of even parts isopropyl (rubbing) alcohol and water. Hold the disc by the hole in the middle and the outer edges. Dip a microfiber cloth into the mixture. Wipe the disc from the center straight out to the edge. Place the disc bottom-up for a few moments to dry.
Here are some tips on how to keep your Xbox and controllers looking and working great. Use a soft lint-free cloth (microfiber cloths work great) dampened with a little bit of mild soap and water, or premoistened disinfectant wipes. Clean every 3-6 months or whenever needed.
If your Xbox game disc isn’t working properly, it may need a good cleaning. Smudges, dirt, and scratches can prevent the Xbox’s laser from reading the disc’s data. Cleaning the disc will only take a few moments if you have the right materials, and you can even remove light scratches using household products.

How to clean a dirty Xbox One?

1 Dust cloth. When it comes to cleaning your Xbox One, your very best friend is a dust cloth. … 2 Compressed air. If it’s been a while since you’ve cleaned out your Xbox One, then you might notice that there is dust everywhere. 3 Avoid damp wipes. … 4 Cleaning your controllers. …
After you’ve had your Xbox One console for a while, you’ll probably notice that it starts to get dusty. Dust can easily build up, and cause a problem down the line. That’s why we’ve put together this handy guide to cleaning your Xbox One. Here’s what to do — and what not to do — to keep your console shiny and clean!
In general, you should avoid using anything that is wet since it has the capacity to screw up your console. Liquid + electrical components = bad time. By sticking with the combo of a dust cloth, and compressed air you should be able to easily clean out your Xbox without accidentally causing any damage to it.
It’s simple: Disconnect and turn off your controller by pressing the Xbox button for 5–10 seconds. Use a disinfectant wipe or apply a small amount of rubbing alcohol to a microfiber cloth and wipe both analog sticks, especially at the base.

How do I clear the storage on my Xbox One?

Xbox button > Profile & System > Settings > Devices & Connections > Blu-Ray > Persistent Storage > Clear Persistent Storage. To clear cache and do a soft reset, go to Settings > System > Console info > Reset Console > Reset and Keep my Games & Apps.
To clear persistent data on your Xbox One: Press the Xbox One button on your controller, and select Settings . Navigate to Devices & connections > Blu-ray . Select Persistent Storage . Select Clear Persistent Storage .
Press the Xbox button  on your controller to open the guide. Select Profile & system > Settings > System > Storage. On the Storage devices screen, a graphic for each drive displays the percentage of space used and available free space. View contents. This takes you to your games and apps, where you can see how much space each game or app is using.
Press the Xbox button  on your controller to open the guide, and then select Profile & system > Settings > System > Storage. Select your device, and then select Format. With many external storage options available, choosing and setting up the right one for you can be tricky.

How do you clean the buttons on Xbox One controller?

How to clean your Xbox One Controller: 1.) Remove the battery pack. 2.) Dip a microfiber cloth or a cotton ball into some rubbing alcohol and use it to wipe off the Xbox One Controller. 3.) Dip a Q-tip into the rubbing alcohol and use it to clean the sticky buttons and dirty analog sticks.
1.) Remove the battery pack 2.) Dip a microfiber cloth or a cotton ball into some rubbing alcohol and use it to wipe off the Xbox One Controller. 3.) Dip a Q-tip into the rubbing alcohol and use it to clean the sticky buttons and dirty analog sticks. 4.) Use a tooth pick to scrape the gunk out of the cracks of the controller.
After you’re done cleaning your Xbox controller, be sure to read our guide on cleaning your PS4 controller. Most Xbox controller cleaning jobs require nothing more than an external sweep. Still, even if your controller seems relatively clean, you should give it a full cleaning.
If you have a button jammed, the most likely culprit is a rogue crumb that’s worked its way between the controller face and the button. If you’re able to implement the cleaning process outlined above, you’ll be able to dislodge anything stuck beneath the controller’s buttons.

Leave a Comment

Your email address will not be published.