How To Fix Xbox 360 Disc Scratches

How to fix scratched Xbox One games?

+ Show 2 more… Xbox consoles use a laser to gather data from the surface of your Xbox game discs. If your disc is scratched, the laser is refracted and will result in skipping or a failure to play. You can use toothpaste to sand down the plastic around the scratch, allowing the laser to read the disc again.
Also, MS does not store all Xbox games on its servers. If you have a scratched game that is recognised when you insert it, but either does not play correctly or does not install, there are couple of ways you can still play your game. 1. Borrow your friends copy, install it to your hard drive and then use your disc to run the game.
So even if the disc is scratched, so long as your Xbox can determine what game it is, you can just download the same install file that would have been placed if you installed from disc… from Xbox LIVE! (Of course it wouldn’t download the file where if you buy the game digitally you can play without a disc).
If you have a scratched game that is recognised when you insert it, but either does not play correctly or does not install, there are couple of ways you can still play your game. 1. Borrow your friends copy, install it to your hard drive and then use your disc to run the game. 2. Rent a copy of the game, install it and then use your copy to run it.

Why does my Xbox 360 disc keep getting scratched?

How Do Xbox 360 Games Get Scratched? It is very normal to be a little careless with gaming consoles and computers. Kids and teenagers are reckless while playing. Sometimes the discs are stored without a case or are kept open, picking up dust which you wipe off with the edge of your t-shirt. That gives the discs small fine scratches and smudges.
So even if the disc is scratched, so long as your Xbox can determine what game it is, you can just download the same install file that would have been placed if you installed from disc… from Xbox LIVE! (Of course it wouldn’t download the file where if you buy the game digitally you can play without a disc).
When the disc fails to read, go to Games and Apps without closing the Store (i.e. through the Home button options). Eject the disc while the install is still paused. And then cancel the install through the Games and Apps. Press B till you return to the Xbox live store that should still be on the game you where installing.
-When you are not playing the game make sure you put the disc away either in its original case or in a cd/dvd binder (if you lay it down on a table top or other surface you run the risk of scratching it). Check with your local video rental stores and see if any of them offer a resurfacing service, usually around $3/disc.

How to fix a scratched CD?

To fix a scratched CD, first squirt some toothpaste with baking soda in it onto the CD. Then, use a cotton swab to work the toothpaste into any deep scratches. Next, wipe the toothpaste around the disc in a circular motion with a paper towel or a microfiber cloth.
So much so, that after a point, a scratched CD/DVD becomes unreadable. And a scratched CD could mean bad news – data loss! While a lot of CD recovery software and tools are available for purchase, it isn’t always necessary to invest money in them. There are a lot of things you can do at home to fix a scratched CD and recover your data.
Run the CD under some warm water and rinse thoroughly. Then, using a soft, clean cloth, dry the CD and double check to make sure you’ve removed all traces of toothpaste or moisture. After you’ve cleaned and dried the CD, use a soft cloth to buff the surface of the CD. If you have multiple CDs to repair, why should you purchase basic toothpaste?
Then, use a cotton swab to work the toothpaste into any deep scratches. Next, wipe the toothpaste around the disc in a circular motion with a paper towel or a microfiber cloth. Rinse the toothpaste off with cool water.

How do you get scratches out of a hard drive?

Erasers are one of the most common and easy “remedies” that techies use. Just use a soft rubbery pencil eraser (not those rough abrasive types) to gently rub on the scratch mark – It seems to work pretty well in removing light scratches, and it cleans off stubborn pieces of stuck dirt as well.
1 Method 1 of 3: Buffing out a Light Scratch. Clean the plastic. Take a clean, damp cloth and dip it into some warm, soapy water. … 2 Method 2 of 3: Removing a Deep Scratch. Get several grades of sandpaper. … 3 Method 3 of 3: Covering up Scratches on Car Plastic. Clean the scratch area. …
If it happens to be too deep or too wide it will leave behind a lot of debris on top of the untouched by scratches surface of the disk. We are making reference to the thin outer layer of aluminum coating that is on the top of the platters.
You can find plastic polishing compound at most big-box stores, either in the auto supply or home cleaning sections. Clean the scratch area. Use a damp cloth dipped into warm water mixed with mild detergent. Rub the cloth over the scratch and surrounding area to remove any dirt and grime.

What is the best way to remove scratches on a computer?

Remove some petroleum jelly from the container using a cotton swab. Rub the petroleum jelly directly on the scratch until the scratch is completely filled. Wipe the excess petroleum jelly off the screen. Using the microfiber cloth, gently wipe the computer screen until it is clean. Remove some petroleum jelly from the container using a cotton swab.
Wipe the cloth in a circular motion over the scratch. Go over the whole scratch, from one end to the other. This buffing action is what can rub the scratch out of the plastic. Keep buffing until the scratch disappears. Clean and dry the area. When you’re done, wipe the area with a fresh damp cloth to remove the paste and residue.
As the name suggests, minor scratches are the most common type of scratches you will find on your laptop. Also, it will be very easy to remove this type of scratches. On the other hand, there will be major scratches. Chances are you could remove them most of the time, but not all the time.
Gently wipe your screen with a soft cloth made of cotton or microfiber. Get a cotton ball or swab and dip it into the petroleum jelly. If you don’t have any on hand, just use a fingertip. Now, rub the cotton ball on the scratch. If you need to apply more jelly to a scratch, do so, no need to be shy! Now, leave the screen alone for a while.

How do you fix a scratch on a plastic car?

Step it up and use some fine grade sandpaper to remove deeper scratches. For scratches in car plastic, make sure to use buffing supplies that are approved for automobile use. If the scratch is in painted plastic, you can easily hide the problem by using a touch-up pen.
When using a heat gun to repair scratches on car interior plastics, you need the heat gun itself, plus some fine sandpaper and an interior car cleaner. You start by cleaning the plastic surface to prepare it for repair.
It is possible to remove scratches from a plastic screen, provided they are not too deep. Some ways to remove scratches from a plastic screen include: wiping with a Magic Eraser, using a specifically designed commercial scratch remover, rubbing with a pencil eraser or polishing with car headlight cream.
Gently sand down the scratches until you can’t feel them. After that, spray the plastic surface with a plastic cleaner and use a microfiber towel to wipe off the dirt and residue. Then, use the polishing/buffing pads to liberally apply polish to the sanded area. Use back-and-forth motions, ensuring that the polish gets into the scratches.

What happens if you scratch a hard drive too deep?

One of the last things you want to have to deal with is scratched platters in your hard drive. That is if you really do care about the data you have stored on it. In many cases, scratched platters spell the end of the road for that particular disc and the data it was storing.
Another issue related to disk scratches comes from the actual characteristics of the scratch. If it happens to be too deep or too wide it will leave behind a lot of debris on top of the untouched by scratches surface of the disk. We are making reference to the thin outer layer of aluminum coating that is on the top of the platters.
Lack of enough space: If there is not enough space on RAM memory, Photoshop will use hard drive space (usually C drive) as a temporary virtual storage holder, which may cause “scratch disks are full” problem. Too many temporary files: Some users close their Photoshop without giving it enough time to properly close down.
A hard drive is made up of a spinning metal platter, on which all of the data is stored. When there is a physical error, your data usually remains intact on the metal platter, but the spinning mechanism or the head that reads the data off the platter might break.

Leave a Comment

Your email address will not be published.