how to pair aftershokz

Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue. Open your device’s Bluetooth menu and select your headphones.” Audrey will say “connected” and the LED indicator will flash blue one time.

Why won’t my AfterShokz won’t pair?

My headphones won’t pair to anything.

Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds. Your headphones will turn on, and then the LED light will flash red and blue. … Turn your headphones off. Your headphones are now reset and can be re-paired to your device.

 

How do I put AfterShokz titanium in pairing mode?

Start with your headphones turned off. Enter pairing mode by pressing and holding volume+ for 5-7 seconds. Audrey will say “Welcome to Trekz Titanium.” Continue holding volume+ until the LED light flashes red and blue. Open your device’s Bluetooth settings and select Titanium by AfterShokz.

 

How do I reset my AfterShokz Bluetooth?

Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You’ll hear beeps and/or feel vibrations. Turn your headphones off. Your headphones are now reset and can be re-paired to your device.

 

Can you pair AfterShokz to multiple devices?

How do I pair Air to multiple devices? Trekz Air offers multipoint pairing, which allows users to connect to two devices at the same time. While you won’t receive audio from both devices at the same time, you’ll be able to seamlessly transition from one device to the other.

 

Where is the multifunction button on AfterShokz headphones?

All AfterShokz wireless Bluetooth headphones include a multifunction button. It can be located on the outside of your headphone’s left transducer. Simply run your finger along the transducer while wearing AfterShokz and you’ll feel it!

 

How do you use AfterShokz headphones?

To power on the headphones, press and hold the multifunction/power button for three seconds and you’ll hear Audrey say “Welcome to AfterShokz” and “battery high,” “battery medium,” “battery low,” or “charge me.” To power off, press and hold the multifunction/power button for three seconds and you’ll hear Audrey say “ …

 

How do you use AfterShokz Trekz Titanium?

Press and hold the power button for 5 seconds to enter pairing mode. The LED indicator will flash blue and red repeatedly while in discovery. Enable the Bluetooth® settings on your device and select “Trekz Titanium by AfterShokz”. The LED indicator will turn blue once connected.

 

How do you answer the phone with AfterShokz?

How do I answer a call? Click the multifunction button once while a call is coming in. You’ll hear one beep and the call will be answered.

 

Why are my Aftershokz blinking red and blue?

A solid red LED light while the headphones are charging signifies that the headphones are not fully charged. A solid blue LED light while the headphones are charging signifies that the headphones are fully charged. A blinking red LED light signifies that the battery is low and the headphones need to be charged.

 

How do you reset Trekz Aftershokz?

Press and hold the multifunction button, power/volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds. You’ll hear 2 beeps and/or feel vibrations. Turn your headphones off.

 

How do I turn on my Aftershokz headphones?

How do I turn on the headphones? Press and hold the volume+ button for 3-5 seconds. Audrey says “Welcome to Trekz Titanium.” Continue holding the volume+ button for an additional 2-3 seconds.

 

What is multi pairing?

Multipoint pairing allows you to be connected to two devices at the same time. While you won’t receive input from both devices at the same time, you’ll be able to seamlessly transition from one device to the other.

 

Does AfterShokz turn off automatically?

6 of 10 found this helpful. Do you? The fact that there is no Auto off feature is a big problem.

 

Do AfterShokz work with Iphone?

Hi there – AfterShokz here. Trekz Titanium will connect to any Bluetooth compatible device, including iPhones and iPods that have Bluetooth capabilities.

 

Can you talk on AfterShokz?

Can AfterShokz be used to make/take calls? Yes. All our wireless models are equipped with dual noise canceling microphones for making and taking phone calls when paired with a smartphone or other Bluetooth-enabled device.

 

How do you unmute AfterShokz?

How do I unmute the mic? Press and hold the volume+ and volume- buttons simultaneously for two seconds while on a call with the mic muted. Audrey will say “Mute Off.”

 

Does AfterShokz work with Spotify?

This is not possible with the AfterShokz Xtrainerz, nor can you stream Spotify, YouTube or even just the radio from your phone as there is no wireless playback.

 

How do I connect my Bluetooth headphones to my TV?

From the home screen, go to the Settings menu and select Remote & Accessories. Choose Add Accessory and put your Bluetooth headphones into pairing mode. Select the headphones in the menu when they appear. Your headphones are now paired with your Android/Google TV device.

 

What is the difference between Trekz air and Trekz Titanium?

Redesigned Frame – AfterShokz Titanium feature a part-titanium, part-plastic frame that weighs in at 36 grams, whereas AfterShokz Air are slightly lighter at 30 grams, with a lightweight wraparound titanium frame. Air headphones also have a slightly redesigned transducer and a second-skin feel.

 

How do I check my AfterShokz battery?

You can also check battery status by powering on your headphones and clicking volume+ or volume-. Audrey will say “Battery High,” “Battery Medium,” “Battery Low” or “Charge Me.” Please allow ample time to air-dry your headphones prior to charging if they’ve collected moisture from rain or sweat.

 

Leave a Comment

Your email address will not be published.