Xbox 360 How To Take Apart

What do you need to take apart an Xbox 360?

Very small flathead screwdriver or a flat point such as a kitchen knife or pushpin Step 1. Disconnect ALL wires from xbox, once everything is disconnected hold power button in for 2 seconds to clear any electric charge left in the console Step 2. Remove Hard Drive and any memory unit/cards you might have plugged into the console.
Just remember that if you screw up your XBox 360 more than it already is, you don’t really have a leg to stand on in regards to your warranty, so it is advised that you call and check out your warranty options. WARNING: THIS WILL VOID YOUR XBOX WARRANTY.
If you are hoping to open a Xbox 360 controller, you will need a Security Torx T8H. The best ones I’ve found are from Llamma’s Tool Section. Small Flathead Screwdrivers/Paper Clips – Used to hold open the friction locks of the 360 front cover.
On the right side of the 360 there is a notch at the end of the faceplate. Put your thumb on this notch and pull away from the console with a good deal of force.

How do you remove the faceplate on a Xbox 360?

Detach the faceplate from the rest of the device. The faceplate is still attached to the console by a thin ribbon cable. Do not attempt to completely remove the faceplate yet. Using a spudger or fingernail, lift the clear blue tab away from the connector.
1 Orient the console right-side up, with the faceplate facing toward you. 2 Locate the two clips connecting the right and left case along the top edge of the console, behind the Wi-Fi card. 3 While pushing the left and right case away from each other with one hand, pry the clips away from the case with a metal spudger.
Insert a metal spudger between the top vent and the top bezel near the rear of the Xbox. Rotate the spudger away from the console, prying the edge of the fan vent up until the two plastic clips come free. Be sure to rotate the spudger far enough so that the plastic clips clear the silver rim of the top bezel.
Take care when removing the fan vent not to break any of the plastic clips. Orient the console so that the words “XBOX 360” on the sides are right-side up, and the faceplate is facing to the left. Insert a metal spudger between the top vent and the top bezel near the rear of the Xbox.

How do I Fix my Xbox 360 that won’t turn on?

An overheating power supply is one of the most common reasons that an Xbox 360 will not start. Many people tuck the power supply away, but this can lead to heat build-up. Make sure your power supply is well-ventilated and not blocked by other object. Unplug the power supply on both ends and let it sit for at least an hour to cool.
Check the lights on the front of the Xbox 360. The ring of lights around your Power button can indicate what kind of problem you are experiencing. This can help determine how to go about fixing it: Green lights – The system is operating normally.
Check the light on your power supply. Your Xbox 360’s power supply also has a light on the back. This light can help you determine if your power supply is failing: No light – The power supply is not receiving power from the wall. Green light – The power supply is working correctly and the Xbox is on.
1 Unplug the power cord from the console. 2 Wait 10 seconds. 3 Plug the cord back into the console, and then press the Xbox button  on the front of the console.

How do I remove the 360 from the console?

Steps Assemble the equipment you’ll need. Disconnect your Xbox 360 from all input and output sources. Ground yourself before taking apart your Xbox 360. Pry off the faceplate. Release the end grilles. Remove the end grilles. Unclip the front of the case. Unclip the back of the case. Remove the bottom of the case.
Remove the bottom of the case. Flip the Xbox 360 so that its top is face-down, then pull the bottom of the case up and away from the Xbox 360. You should now be looking at the metal part of the Xbox 360’s case. Take out the screws holding the top of the case in place.
Gently ease your flathead screwdriver under the green ribbon on the left side of the console’s front face and pry. The eject button should pop right off. Lift the top of the case off of the Xbox 360. The case should pull right off, and you should now be looking at your Xbox 360’s internal components.
1 Poke a large, bent paperclip through each of the holes in the top row of ventilation spaces on the Xbox 360’s casing,… 2 Insert a flathead screwdriver into the space where the grille meets the console case, then work the screwdriver around… 3 If you have a hard drive on your Xbox 360, first remove it. More …

Why won’t my Xbox 360 turn on?

An overheating power supply is one of the most common reasons that an Xbox 360 will not start. Many people tuck the power supply away, but this can lead to heat build-up. Make sure your power supply is well-ventilated and not blocked by other object. Unplug the power supply on both ends and let it sit for at least an hour to cool.
Check the light on your power supply. Your Xbox 360’s power supply also has a light on the back. This light can help you determine if your power supply is failing: No light – The power supply is not receiving power from the wall. Green light – The power supply is working correctly and the Xbox is on.
Check the lights on the front of the Xbox 360. The ring of lights around your Power button can indicate what kind of problem you are experiencing. This can help determine how to go about fixing it: Green lights – The system is operating normally.
Four red lights – This indicates a faulty or unsupported A/V cable. Check the light on your power supply. Your Xbox 360’s power supply also has a light on the back. This light can help you determine if your power supply is failing: No light – The power supply is not receiving power from the wall.

How do I know if my Xbox 360 is working properly?

1 Use a bare finger to press the Power button (Xbox 360 S). … 2 Let the power supply cool. An overheating power supply is one of the most common reasons that an Xbox 360 will not start. 3 Let the console cool. … 4 Try a different video cable. … 5 Disconnect any peripherals. … 6 Look for bent pins in the USB ports. …
You can use the secondary error code to determine the exact cause: While the console is on and the red lights are flashing, press and hold the Sync button on the front of the Xbox. While holding the Sync button, press and release the Eject button. Note the flashing lights that indicate the first digit.
Check the light on your power supply. Your Xbox 360’s power supply also has a light on the back. This light can help you determine if your power supply is failing: No light – The power supply is not receiving power from the wall. Green light – The power supply is working correctly and the Xbox is on.
Yes, live on x360 is still running 🙂 You can always check the current status of services here: Xbox Live Status. To check your current subscription, go to account.microsoft.com. Was this reply helpful? Was this reply helpful? Thank you for posting on the Xbox forums.

How do I know if my Xbox 360 power supply is bad?

Before you check the console’s LED ring, it is necessary to ensure that you fully insert the Xbox 360 power cord into the console and the power brick. If there is steady orange light, your power source is alright. However, the absence of an LED indication or a flashing orange light could indicate the problem.
Problems with your Xbox 360 console can sometimes be solved by making sure your power supply connections are firmly secured. Try these steps in the following order: Turn off the console. Unplug the power cord from the back of the console. Unplug the power supply from the electrical outlet, and then unplug the short cord from the power supply.
Testing for a faulty PSU is an elimination process that isn’t detailed but can help you know whether your power supply is working properly or not. Make sure the external switch on the rear of the PSU isn’t accidentally turned off. See if the power cable in the wall socket and rear of the PC is secure.
Since the Xbox 360 is an older generation console, it does not have this feature. A power surge occurs when the flow of electricity at the main supply is temporarily interrupted. This surge of electricity can break down your Xbox power supply and render it inefficient.

Leave a Comment

Your email address will not be published.